1

00:00:01,520  -->  00:00:06,170
In the previous video, we already practice
about switch.

2

00:00:06,170  -->  00:00:15,240
So here we have topology that contains 5 pc,
And all of the pc is connected to the switch.

3

00:00:15,240  -->  00:00:22,880
All of this pc is in the same block subnet,
which is the first block subnet.

4

00:00:22,880  -->  00:00:29,140
Before we learn about router, let’s create
the same topology again, but we will use the

5

00:00:29,140  -->  00:00:33,730
second block subnet.

6

00:00:33,730  -->  00:00:43,530
Here let’s import a switch, and then let’s
import some PC.

7

00:00:43,530  -->  00:01:00,460
Let’s say we will use 3 pc. and then connecting
all of the pc to the switch

8

00:01:00,460  -->  00:01:06,780
Okay now let’s configure the ip address
of the pc using the second block subnet.

9

00:01:06,780  -->  00:01:12,179
let’s say the ip address is start from 33.

10

00:01:12,179  -->  00:01:19,170
Remember that network ip can never be used,
so we can not use 32.

11

00:01:19,170  -->  00:01:26,200
The possible ip address that we can use is
between 33 until 62.

12

00:01:26,200  -->  00:01:30,950
In this case we will start from 33.

13

00:01:30,950  -->  00:01:40,789
Here let’s go to desktop, ip configuration,
the ip address is 10.10.10.33, and then the

14

00:01:40,789  -->  00:01:48,389
subnetmask is 255.255.255.224.

15

00:01:48,389  -->  00:01:58,319
Okay next here let’s configure with 34,
so the ip address is 10.10.10.34, the subnetmask

16

00:01:58,319  -->  00:02:08,369
is 255.255.255.224, last, let’s configure
with 35.

17

00:02:08,369  -->  00:02:20,950
Here the ip address 10.10.10.35, and the subnetmask
is 255.255.255.224.

18

00:02:20,950  -->  00:02:27,230
Okay we have done configuring the ip address
of all pc. now let’s test the connection

19

00:02:27,230  -->  00:02:32,530
between pc5, pc6 and pc7.

20

00:02:32,530  -->  00:02:36,860
Here let’s try from pc5 to pc6.

21

00:02:36,860  -->  00:02:38,270
Okay success.

22

00:02:38,270  -->  00:02:42,660
This is mean that the connection between pc5
and pc6 is ok.

23

00:02:42,660  -->  00:02:52,830
Let’s try from pc6 to pc7, okay also success.

24

00:02:52,830  -->  00:03:01,240
And finally from pc5 to pc7, okay and this
is also success.

25

00:03:01,240  -->  00:03:08,280
Okay now we have two topology, let’s say
the first topology is room number 1, and the

26

00:03:08,280  -->  00:03:12,000
second topology is room number 2.

27

00:03:12,000  -->  00:03:16,740
And this two room is use different block subnet.

28

00:03:16,740  -->  00:03:24,010
In the next video, we are going to learn how
to connecting this two room, okay, thankyou

29

00:03:24,010  -->  00:03:26,830
for watching and see you on the next video!